15 Liter 20 Liter Plastic Drum Making Machinery/Chemical Barrel Blow Molding Machine

Model NO.: ABLB100II
Application: Bottle
Max.Product Volume: 8L
Trademark: APOLLO
Transport Package: Film Packing
Specification: CE, ISO9001
Origin: Zhangjiagang City, Jiangsu Province, China
HS Code: 8477301000

15 Liter 20 Liter Plastic Drum Making Machinery/Chemical Barrel Blow Molding Machine


1L 5L HDPE PP Plastic Bottle Extrusion Blow Molding Machine1L 5L HDPE PP Plastic Bottle Extrusion Blow Molding Machine

 


1L 3L 5L Plastic Bottle Jerry Can Blow Molding Machine
1L 3L 5L Plastic Bottle Jerry Can Blow Molding Machine
1L 3L 5L Plastic Bottle Jerry Can Blow Molding Machine1L 3L 5L Plastic Bottle Jerry Can Blow Molding Machine

Product Description

ABLB75 extrusion bottle blow molding machine was specially designed for making plastic water bottles, lubricant oil bottles, detergent bottles, plastic toys and other plastic containers not over 8L.

The features of this machine:
(1)It is suitable for producing PE, HDPE, PP, PVC, PETG, PS so on, plastic containers and bottles in all shapes are available, the max. Product volume is up to 8L.
(2)Single station single die head design, very easy to operate and maintenance.
(3)Most components of the blow moulding machine are from famous world brand.
(4)Fully automatic process with low power consumption, high efficiency, quick and safe operation, easy for maintenance.
(5)Multiple screw available for double layer or tranparent liquid lever line.
(6)Auto deflashing device available, can remove the extra parts of bottles.
(7)Auto lubricant system controlled by PLC.




 

electronic parts
 
Name Trader
Micro computer control system Japanese MITSUBISHI
Temperature Controller TAIWAN YANHUA  PID
Auxiliary Relay OMRON
contactor Schneider from France
Electric motor Three phase 220V or 380V
Power Source TAIWAN MEANWELL
Transducer TAIDA FROM CHINA
hydraulic parts
 
Name Trader
Oil pump TAIWAN HIGH-TECH
Valve JAPAN YUKEN
Oil pump and connection JAPAN YUKEN
Sealed part HALLITE
air control system
 
Name Trader
Cylinder AIRTAC
Air Valve FESTO
 
Max. Product volume 8 liters
Output capacity 120pcs/h
Screw diameter 75mm
Screw L/D ratio 24 L/D
Screw drive power 22 KW
Screw heating capacity 6 KW
No.of heating zone 4 zones
Output of HDPE 100KG/H
Oil pump drive power 11 KW
Clamping force 78KN
Max.size of mold 188-600mm
Mold stroke 400 X 450mm
Max.die diameter 180mm
Blowing pressure 0.6 mpa
Air Volume 0.7 M³/MIN
Cooling water pressure 0.3mpa
Water consumption 60 L/MIN
Size of Machine 3.6x1.8x2.8m
Weight of machine 6.3 ton


 

Drilling And Bolting Machine

A drilling and bolting machine consists of one, two or three rock drill carriages, sometimes a platform, which the miner stands on to load the holes with explosives, clear the face of the tunnel or else. The carriages are bolted onto the chassis, which supports also the miners cabin and of course the engine. Modern drilling jumbos are relatively large, there are however smaller ones for use in cramped conditions. Whereas modern jumbos usually fitted with rubber tyres and diesel-powered, there are also exist variants with steel wheels, to ride on rails and even single carriage sled-mounted ones. Electric power is also common, historic jumbos were powered by compressed air. Electricity and compressed air produce no exhaust gases, which is preferable if work is done in smaller tunnels where good ventilation is difficult.

Mining Machinery,Mining Bolting Machine,Underground Mining Machines,Drilling And Bolting Machine

NORTH HEAVY GRYPS EQUIPMENT AND ENGINEERING CO.,LTD , https://www.nhgtunnel.com