Factory Oxygen Generator Oxygen Concentrator

Factory oxygen generator oxygen concentrator
1. Principle:
PSA oxygen generator uses clean compressed air as raw material and zeolite molecular sieve (ZMS) as 
sorbent, to produce oxygen gas with Pressure Swing Adsorption (PSA) technology in normal 
temperature. Comparing with oxygen, nitrogen is preferentially adsorbed by ZMS while at high pressure. 
ZMS releases adsorbed nitrogen at low pressure, which is called regeneration. The oil free and dustfree 
compressed air enters one of the two adsorption towers filled with ZMS. Nitrogen is adsorbed ZMS micro 
pores and then retained and leaves oxygen as product gas. When ZMS in one tower is saturated with 
nitrogen, the adsorption tower is depressurized and ZMS is regenerated for next cycle. While one tower 
finishes the cycle, the other adsorption tower starts to work. With control on/off state of the pneumatic valve 
by PLC, to separate nitrogen and oxygen gas, and create continuous flow of oxygen with required purity.
2. Industrial PSA oxygen generator features:
Skid structure, easy installation.
When oxygen generator reaches site, just connect the air compressor into main machine, then with one
simple touch on the start, the whole machine starts to work, no need for site installation, site training,etc. No
need for Gamma engineers go to site, further saving customer's cost.
Special filling device
Making the fill of molecular sieve achieve max density and evenness. Getting rid of carbon molecular sieve
creeping and wearing and "tunnel effect" from the root. Therefore the molecular sieve has longer lifetime,
higher utility ratio and lower material air consumption.
Special gas distributors
Equipped at both top and bottom side of the adsorption tower adapting multi-layer hole plate structure and
special hole arrangement. These makes gas distribution within tower more efficient.
Pipeline flow speed control technology
Making the molecular sieve avoid damage caused by collision by "boiling" at the top of adsorption tower, no
need extra pressing device.
3. How to get a prompt quotation of oxygen machine:
When you send the inquiry to us, pls kindly send it with below technical information.
1) O2 flow rate: _____Nm3/hr( or How many cylinders do you want to fill per day(24hours))
2) O2 purity: _____%
3) O2 discharge pressure: _____Bar
4) Voltages and Frequency : ______V/PH/HZ
5) Application:
4. FAQ:
    Q: OEM/ODM, or customers logo printed is available?
    Yes, OEM/ODM, customers logo is welcomed.
    Q:  Delivery date?
    Usually 30 work days after receiving deposit, specific delivery date based on order quantity
    Q: what's your payment terms?
    Advanced payment 30% TT and 70% TT balance before shipping, Western Union, Paypal, other payment 
    terms also can be discussed based on our cooperation.
    Q: How to control your quality?
    We have professional QC team, control the quality during the mass production and inspect the completely
    goods before shipping.
    Q:  If we don't have shipping forwarder in China, would you do this for us?
    We can offer you best shipping line to ensure you can get the goods timely at best price.
5. Contact Yujia:


  Factory oxygen generator oxygen concentrator
1. Principle:
PSA oxygen generator uses clean compressed air as raw material and zeolite molecular sieve (ZMS) as 
sorbent, to produce oxygen gas with Pressure Swing Adsorption (PSA) technology in normal 
temperature. Comparing with oxygen, nitrogen is preferentially adsorbed by ZMS while at high pressure. 
ZMS releases adsorbed nitrogen at low pressure, which is called regeneration. The oil free and dustfree 
compressed air enters one of the two adsorption towers filled with ZMS. Nitrogen is adsorbed ZMS micro 
pores and then retained and leaves oxygen as product gas. When ZMS in one tower is saturated with 
nitrogen, the adsorption tower is depressurized and ZMS is regenerated for next cycle. While one tower 
finishes the cycle, the other adsorption tower starts to work. With control on/off state of the pneumatic valve 
by PLC, to separate nitrogen and oxygen gas, and create continuous flow of oxygen with required purity.
2. Industrial PSA oxygen generator features:
Skid structure, easy installation.
When oxygen generator reaches site, just connect the air compressor into main machine, then with one
simple touch on the start, the whole machine starts to work, no need for site installation, site training,etc. No
need for Gamma engineers go to site, further saving customer's cost.
Special filling device
Making the fill of molecular sieve achieve max density and evenness. Getting rid of carbon molecular sieve
creeping and wearing and "tunnel effect" from the root. Therefore the molecular sieve has longer lifetime,
higher utility ratio and lower material air consumption.
Special gas distributors
Equipped at both top and bottom side of the adsorption tower adapting multi-layer hole plate structure and
special hole arrangement. These makes gas distribution within tower more efficient.
Pipeline flow speed control technology
Making the molecular sieve avoid damage caused by collision by "boiling" at the top of adsorption tower, no
need extra pressing device.
3. How to get a prompt quotation of oxygen machine:
When you send the inquiry to us, pls kindly send it with below technical information.
1) O2 flow rate: _____Nm3/hr( or How many cylinders do you want to fill per day(24hours))
2) O2 purity: _____%
3) O2 discharge pressure: _____Bar
4) Voltages and Frequency : ______V/PH/HZ
5) Application:
4. FAQ:
    Q: OEM/ODM, or customers logo printed is available?
    Yes, OEM/ODM, customers logo is welcomed.
    Q:  Delivery date?
    Usually 30 work days after receiving deposit, specific delivery date based on order quantity
    Q: what's your payment terms?
    Advanced payment 30% TT and 70% TT balance before shipping, Western Union, Paypal, other payment 
    terms also can be discussed based on our cooperation.
    Q: How to control your quality?
    We have professional QC team, control the quality during the mass production and inspect the completely
    goods before shipping.
    Q:  If we don't have shipping forwarder in China, would you do this for us?
    We can offer you best shipping line to ensure you can get the goods timely at best price.
5. Contact Yujia:


 

Jubilee Clip

The clamps on roll can be used in the actual cutting hose clamp according to the actual situation, improve the utilization of the clamps, reduce material waste;

If you use our poduct ,you will achieve rapid installation and fast removal, greatly improving efficiency.

GOLMA-COOL ventilation was founded in 2005, we are the special manufacturer in the field of ventilation system. Having been engaged in HVAC/R industry for more than 10 years, we have accumulated rich product knowledge and experience for below productions: *Flexible air ducting*Aluminum Semi Rigid flexible duct*Flexible Duct Connector*Insulation pins*Duct fittings*Duct hardware*Pipe clamps and ventilation clamps*Air valve and diffuser *HVAC TAPE*A/C Brackets We possesses excellent manufacturing capability in the market to provide consistently high quality products. With abundant capital, a professional and experienced team and supports from our strong strategic partners .

GOLMA-COOL dedicates to develop continuous innovation technology, to keep our range of products up to date with the current trends and developments of HVAC/R industry.We are assure you with high quality, competitive price, fast delivery and efficient service all the time. We are here with you all the time.

Jubilee Clip,Hose Clamp Jubilee Clip,Genuine Jubilee Clips,Jubilee hose clip clamps

Ningbo Gemu Ventilation Technology Compnay Limited , https://www.golmacool.com