Hand Gear Oil Transfer Pump

    Model NO.: JYS-03-09
    Warranty: 1year
    Trademark: no brand
    Transport Package: Carton Box
    Specification: Pump body diameter 130mm
    Origin: China
    HS Code: 84312000
    Model NO.: JYS-03-09
    Warranty: 1year
    Trademark: no brand
    Transport Package: Carton Box
    Specification: Pump body diameter 130mm
    Origin: China
    HS Code: 84312000
    JYS-03-09
    Tube Size Inlet32mm      oulet 25mm Flow 23kg/min
    Tube
    surface treatment
    Power coating Qty 6pcs
    Galvanization Inner box 17*13*12.5cm
    Chrome plating Carton box 105*20.5*13.5cm
    Pump body diameter 130mm G.W./N W.: 24/23kg
    Lift 5m Three tube removable
    Suction 1m
    Rotation 70r/min Inner box 36*15.5*13.8cm
        Carton box 48*37*29cm

    Operation:
    1. insert the standpipe into the bung of the barrel,then thread the lower part of the bung adapter onto the bung-hand tighten only.
    2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
    3. When ready to pump,rotate the handle clockwise to begin the flow of fluid.
    Use attention:
    1.we suggest for Dispensing Oil,gasoline, kerosene, diesel fuel and low viscosity oil .
    2.Hand's rotation direction like(1)Main engine(pump part)upside arrow instruction direction operation.
    3.Wrong use of drugs,saline, etc.,Please immediately oil in clean pump bodies and so on use the lamp oil,to clean.
    4.To choose the ground oil tank, etc.,to avoid the rain, dew,sunlight and easy to fire and other places, in accordance with the provisions of the Fire Services Act.
    5.Please note that this machine if you do not comply with the warnings and precautions for use, and injury and the accident occurred, is not responsible for manufacturers.
    6.Please note that unauthorized modification of the machine, using the wrong method of failures of accidents, as well as all other improper operation,is not responsible for manufacturers.
    Suitable for a variety of conditions: suitable for all quality quality conditions, this hand pump can be used, as long as quality extraction of oil does not freeze!
       7.Can not be extracted water and acid and alkali chemical solution!
    Hand Gear Oil Transfer Pump
    Hand Gear Oil Transfer Pump
    Hand Gear Oil Transfer Pump
    Hand Gear Oil Transfer Pump
     
    JYS-03-09
    Tube Size Inlet32mm      oulet 25mm Flow 23kg/min
    Tube
    surface treatment
    Power coating Qty 6pcs
    Galvanization Inner box 17*13*12.5cm
    Chrome plating Carton box 105*20.5*13.5cm
    Pump body diameter 130mm G.W./N W.: 24/23kg
    Lift 5m Three tube removable
    Suction 1m
    Rotation 70r/min Inner box 36*15.5*13.8cm
        Carton box 48*37*29cm

    Operation:
    1. insert the standpipe into the bung of the barrel,then thread the lower part of the bung adapter onto the bung-hand tighten only.
    2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
    3. When ready to pump,rotate the handle clockwise to begin the flow of fluid.
    Use attention:
    1.we suggest for Dispensing Oil,gasoline, kerosene, diesel fuel and low viscosity oil .
    2.Hand's rotation direction like(1)Main engine(pump part)upside arrow instruction direction operation.
    3.Wrong use of drugs,saline, etc.,Please immediately oil in clean pump bodies and so on use the lamp oil,to clean.
    4.To choose the ground oil tank, etc.,to avoid the rain, dew,sunlight and easy to fire and other places, in accordance with the provisions of the Fire Services Act.
    5.Please note that this machine if you do not comply with the warnings and precautions for use, and injury and the accident occurred, is not responsible for manufacturers.
    6.Please note that unauthorized modification of the machine, using the wrong method of failures of accidents, as well as all other improper operation,is not responsible for manufacturers.
    Suitable for a variety of conditions: suitable for all quality quality conditions, this hand pump can be used, as long as quality extraction of oil does not freeze!
       7.Can not be extracted water and acid and alkali chemical solution!
    Hand Gear Oil Transfer Pump
    Hand Gear Oil Transfer Pump
    Hand Gear Oil Transfer Pump
    Hand Gear Oil Transfer Pump
     

    Fan Heater

    *. PTC heating,overheat protection, work quiet.
    *. Large hot air outlet, instant get warm and hot.
    *. One key and Two gear heating air optional.
    *. Novel and beautiful design, easy to operate.
    *. Work quietly and safe, natural warm breeze.
    *. Voltage: 110V/220V; Noise<50db.

    *. No radiation. high effective bring warm air.

    *. Overheating protection , anti falling design.
    *. Power off if falling down, very safe.
    *. ABS &PP Fire-proof material, Durable 300℃
    *. Good for desk in office/home/study
    *. Warm up around air quickly and warm hands

    The heating effect of the air heater is quite good. The performance must make the small sun too strong. The heating range of the air heater is much larger than that of the small sun. The small sun is single point heating, and the air heater is the heating of the whole house, with high safety. I personally have been using the heater, and the effect is really good. Today I just introduce you to several brands of heater. The brand of air heaters recommended today stands out among many heaters with the characteristics of fast heating and large-area heating. For example, the above air heaters have different functions and appearance and high cost performance



    Fan Heater,Handy Heater,Portable Heater,Wall Fan Heater

    Shenzhen Ewong Technology CO.LTD , https://www.dgewongtech.com

    Previous Post: High Precision CNC Lathe Auto Part for Toyota with Ts16949
    Next Post: Durable Interlock Exhaust Pipe Forming Machine
    Home
    Recent Posts
    • Aluminum Car Radiator for Toyota Lexus′is250/I…
    • Carbon Black Ash Removal System Carbon Cleaner
    • High Quality Filter for Excavator
    • Ccj8253 Sample Tuff-Koat Alloy Rotavator Blades
    • Cylinder Block for VW 1.9tdi/ 2.0L/ Jv481/ Ajr48…
    • Manufacturing CNC Hardware Machine Parts / Machi…
    • Stainless Steel 304 Accessories for Tank Manhole…
    • [Analysis] Sludge anaerobic technology real digg…
    • How to avoid the failure of the digital display …
    • Yuchai 16VC first shipboard prototype was succes…
    • Combine Harvester Spare Parts of Blade Protector
    • Ox Drawn Farming Plough and Spare Parts
    • Plain Bore Yoke (Vertical Pin Hole)
    • BS25 BS30 Industry Chain Steel Large Roller Doub…
    • Bearings Bearings Tapered Roller Bearing 30206 3…
    • DIN 137b Wave Spring Washer
    • High Precision Computer Electronic Panel Saw
    • China Manufacture Custom Metal Machining Part Ro…
    • The mainland LED factory sits on the big, the LE…
    • Status Quo and Countermeasures of the Management…