High Altitude Low Pressure Climatic Simulation Test Equipment

GJB 150.2 Lab High Altitude Low Pressure Climatic Simulation Test Equipment

Description 

  Altitude test chamber, namely High-low temperature and low pressure test chamber or Low pressure test chamber
   Can be used in electrical products, materials, spare parts, equipment, etc, for single featured test--high temperature, low temperature and altitude(under 30,000 or 45,000 meters) test and comprehensive test--- heat-and-cool circulation test, temperature-and-altitude test. 





Specification :
Standard configuration:
   Two sample holders; an observation window; φ25 or φ50 cable hole.
Optional parts:
   Communication interface RS232 or RS485, logger, micro printer, remote temperature and humidity control system (including printers, communications software, computer), mobile casters.
Structure:

Overall structure: the new design is easier to operate and maintain.
Water and electricity system is separated;
External humidifying design;
Three levels of overheat protection, easy access for refrigeration servicing, etc.

Material:

Tecumseh, Bock Compressor;
High quality electronic components (DANFOSS, ALCO, RANCO, SPORLAN, SAGINOMIYA, Schneider solenoid valve)

Standards Implemented and Met
B10592-89 Technical requirements for high and low temperature test chamber
GB2423.1-1989 Low temperature test
GB2423.2-1989 High temperature test mode

Thermostat regulator balanced manner BTPC thermostat (regulator) mode
Ambient temperature: 5 ºC ~ 35 ºC; Humidity: ≤90% RH; Atmospheric pressure: 86-106kPa
Material cold rolled steel shell, surface spray
SUS304 stainless steel inner tank
Rigid polyurethane foam insulation foam glass +
Regulator heater Nichrome heater
Fan shaft seal magnetic fluid flow fan
Refrigeration machinery contraction two binary cascade refrigeration (cooling)
Refrigeration compressor: Semi-hermetic compressors
Refrigerant:  R404a / R23
Controller Display: 7 "color screen, liquid crystal display (LCD)
Run the program mode, setting mode
Setting mode Touch (piezoelectric)
Program capacity 32 programs, each up to 800 steps (segments), maximum 999 cycles
Setting range operating temperature range adjustment device according to (limit 5 ºC, the lower limit of -5 ºC)
Display Resolution time: 0.1min; temperature: 0.1 ºC; pressure: 0.1kPa
Enter thermal resistance, pressure sensors
Anti-windup PID control mode
Power: AC380 (1 ± 10%) V (50 ± 0.5) Hz three-phase four-wire protective earth
Maximum power current: (A) 35 35

Safety devices

1. Power owed to reverse protection
2. No fuse switch
3. Dry compustion prevention switch
4. The water protection switch
5. Over-temperature protection
6. Motor overload protection
7. The high-pressure compressor protection
8. The overheating protection of compressor 
9. The over-current protection of compressor
10. The over-current protection of vacuum pump

Features

1. Temperature:  -70 ~170ºC
2. Altitude: ground to 100,000 feet
3. External pressure type box body structure and stainless steel tank design, rational air circulation system and scientific layout of heating, refrigerating system.
4. Adopts international brand of imported parts for cooling system to improve operation reliability
5. High precision and stable performance with touch screen controller, friendly Man-Machine interface.
6. Multiple layers of safe device , easy for maintenance.
7.Viewing window and cable ports are available.
8. Vacuum pump sized for climb/dive rate required by application

 Altitude chamber working principle

Packing & Shipping

1.Strong standard wood case, inner plastic films wrapped for Low Air Pressure Test Climatic Altitude Equipment
2. Usually we delivery the equipment by air,by sea or by express. it depends on customer 

About US

    Dongguan XinBao-OTS Instrument Co., Ltd. was established in 1978, with 35 years' history, is one of the leading companies solely dedicated to manufacture of environment,class,mechanics,package testing equipment...
    (such as constant temperature and humidity chambers, environmental chambers, thermal shock test
chambers,fast change rate chambers, yellowing resistance aging test chamber, salt spray chamber,
tensile testing machine, universal testing machine,carton compression testing machines, bursting
strength testing machine, vibration test, etc.) ...
    OTS has the equipment and expertise, with own R&D and consultant team, to meet and exceed your testing requirement. with offices in unrivaled quality advantage, dynamic management team with superb manufacturing process,also the quality with the world norms: ISO , ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,CE, TAPPI, AATCC, IEC, VDE...

Our Services

We are here to help you. Services available:
   Replacement manuals
   Consumables and replacement parts
   On-site maintenance and repair
   Warranty support
   Over-the-phone service support and advice
If you have an OTS chamber  , we will do our best to help you in whatever way we can.  
 Manuals: PDF files of manuals for current models are available free. Please contact us to request a copy. Older and printed copies at additional charge.

Service repair:  
We prefer you contact us direct at the factory with any problems you may be experiencing.  
We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs.  
Rarely can a local contractor get all that done for you as quickly as we can.  
We also guarantee the work 


RFQ

Q1 :  Can you customize the product?
   A: Yes, we can customize any products according to requirements.
Q2 :  How to choose the most suitable products?
   A: Our professional team will give you the best suggestion,just be  patiently to tell us the information         about the parameters your required.
 Q3 : Can you arrange installations and commissioning in our lab?
   A: Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link        power in your lab, then can start to operate
     Secondly; we had detailed operation manual with chamber , any problems you can find and solve in      it. Thirdly, some of customized chambers we should to install and teach your team to operate .

Please do not hesitate to contact us!!!
Or Send your inquiry below...

Ride On Road Roller mainly used for compacting soil, trench foundation, large excitation force and high compacting efficiency.
It is ideal for rolling sand, semi-cohesive and cohesive soil, roadbed stable soil and asphalt concrete pavement.

It can also be used for the compaction and leveling of asphalt surface operations, and can be used to compact sand, gravel, soil and asphalt. All can also be said that such a Road Roller is equivalent to the combination of a single wheel and a double wheel.

For a full hydraulic dual-drive vibratory roller, the steel wheel is involved in both compaction and walking drive, so the load of the steel wheel can be designed to be large, generally accounting for 70% of the weight of the whole machine. it is good. Vibration is the use of high-frequency vibration generated by a vibrator fixed on an object of a certain mass to be transmitted to the pressed material, causing it to vibrate close to its own natural vibration frequency. As the particles approach and the density increases, the material is compacted. Vibration, low surface stress, short process time, large loading frequency, can be widely used for materials with low viscosity, such as sand, cement concrete mixture.

Ride On Road Roller

Power Road Roller,Ride On Road Roller,Road Roller 10 Ton,Roller Machine For Road Construction

Shandong Nuoman Engineering Machinery Co., Ltd , https://www.chinanuoman.com