Plate Bending Machine With ISO & CE Certificate

Plate Bending Machine With ISO & CE Certificate

Structure:

-The all-steel-structure of SANTEC Press Brakes consist of side frames, RAM, I-Beam type table and pair of levers manufactured from ultrasonically tested steel plates.
-All sections are designed to give minimum deflections and maximum rigidity
-Pair of hydraulic cylinders are synchronized by a heavy duty torque tube welded to the levers. This offers absolute parallelism between them and table working surfaces.

Power Pack Unit:

-The low noise Hydraulic system is designed as per international standards and assembled with internationally reputed make components.
-Valves are mounted on a specially designed compact manifold block minimizing pipings and chances of leakages. The large sized oil reservoir provides adequate cooling.
-Imported sealing kit prevents scratching of bore in case of seal failure and backup seal offers additional sealing enabling to use machine for sometime at a little pressure drop while awaiting seal replacement, thus avoiding downtime.

Other Important Features:

-Repetitive accuracy is with in ± 0.04 mm
-International Quality hydraulic valves rated at 310 bar but working pressure is less than 160bar, this ensure trouble free operation.

-Adjustable five piece guides, provided with special non metallic liners for long life.
-Quick adjustable stroke length.
-Front operated back gauge with micro setting arrangement
-Raw tilting arrangements to maintain bending accuracy over a period.
-Moving work station with on / off buttons, selector switches foe inch, single cycle & auto cycle & emergency stop buttons for easy operation & better safety.
-Rear Cylinder design using mechanical advantage through lever, reduces the cylinder size which allows to use medium pressure hydraulic component & also improves stroke accuracy.
-Fast approach & fast return speed for reducing cycle time, slow pressing speed for better stroke control & bend accuracy.

Standard Accessories:

-Main Drive Motor
-Electric Control Panel with selection of Auto, 'INCH' & Single Cycle Auto mode operation
-Movable work station with pair of foot switch
-Pair of lifting links
-Pair of Sheet support
-Fine stroke adjustment rod with limit switch
-Manual back gauge with micro setting
-One suitable five way Die & Punch of EN - 9
-Centralised lubrication system with flow control valve for proper lubrication
-RAM tilting arrangement


  Plate Bending Machine With ISO & CE Certificate

Structure:

-The all-steel-structure of SANTEC Press Brakes consist of side frames, RAM, I-Beam type table and pair of levers manufactured from ultrasonically tested steel plates.
-All sections are designed to give minimum deflections and maximum rigidity
-Pair of hydraulic cylinders are synchronized by a heavy duty torque tube welded to the levers. This offers absolute parallelism between them and table working surfaces.

Power Pack Unit:

-The low noise Hydraulic system is designed as per international standards and assembled with internationally reputed make components.
-Valves are mounted on a specially designed compact manifold block minimizing pipings and chances of leakages. The large sized oil reservoir provides adequate cooling.
-Imported sealing kit prevents scratching of bore in case of seal failure and backup seal offers additional sealing enabling to use machine for sometime at a little pressure drop while awaiting seal replacement, thus avoiding downtime.

Other Important Features:

-Repetitive accuracy is with in ± 0.04 mm
-International Quality hydraulic valves rated at 310 bar but working pressure is less than 160bar, this ensure trouble free operation.

-Adjustable five piece guides, provided with special non metallic liners for long life.
-Quick adjustable stroke length.
-Front operated back gauge with micro setting arrangement
-Raw tilting arrangements to maintain bending accuracy over a period.
-Moving work station with on / off buttons, selector switches foe inch, single cycle & auto cycle & emergency stop buttons for easy operation & better safety.
-Rear Cylinder design using mechanical advantage through lever, reduces the cylinder size which allows to use medium pressure hydraulic component & also improves stroke accuracy.
-Fast approach & fast return speed for reducing cycle time, slow pressing speed for better stroke control & bend accuracy.

Standard Accessories:

-Main Drive Motor
-Electric Control Panel with selection of Auto, 'INCH' & Single Cycle Auto mode operation
-Movable work station with pair of foot switch
-Pair of lifting links
-Pair of Sheet support
-Fine stroke adjustment rod with limit switch
-Manual back gauge with micro setting
-One suitable five way Die & Punch of EN - 9
-Centralised lubrication system with flow control valve for proper lubrication
-RAM tilting arrangement


 

Straw Baler Machine

Straw Compress Baler Machine,Straw Baling Machine,Straw Baling Compress,Straw Baler Press Machine

Nantong Sika Machinery Co., Ltd. , https://www.sikamachinery.com