Agricultural pump installation precautions and troubleshooting

    Agricultural pump installation of technical requirements are very strict. First, the pump base should be strong, and try to shorten the length of the suction pipe. Second, the inlet pipe should be sealed and reliable. Bottom valve and hose fasten with insurance rope. Water sources for the channel, the bottom valve should be higher than the bottom of 0.5 meters, and screening to prevent debris into the pump. The third is in the pump belt drive, the tight edge of the belt should be in order to improve transmission efficiency. Pump impeller steering should be consistent with the direction of the arrow.

    Check the pump should pay attention to three points:

    (1) The pump shaft should be able to rotate flexibly without impact sound; the pump shaft should not be obviously swayed in the radial direction and need to add enough lubricant.

    (2) Check whether there is damage to the inlet hose, crack if timely repair sticking. Check the fastening bolts are loose, to tighten loose bolts.

    (3) submersible pump motor windings, cable insulation to meet the requirements in order to use.

    Troubleshooting method:

    (1) no water or no water, mostly due to the end of the valve stuck, part of the blockage of the water filter; absorbent height is too high or suction pipe leaks; and impeller flow blockage caused by, respectively, to take appropriate measures to solve.

    (2) pipeline leakage or leakage, the bolt may not be tightened during installation. If the leakage is not serious, in the place of leakage or leakage of cement slurry, and tighten the nut with a wrench; if serious water leakage, we must reload.

    (3) pump vibration, the rotor may be unbalanced, or poor coupling, bearing wear and bending; may also be caused by rotating parts loose, rupture and pipe support is not strong and so on. Should be adjusted according to different situations, reinforcement, straightening or replacement.

    Boride Powder

    Boride-based powders are commonly used in thermal spray applications due to their high hardness, wear resistance, and thermal stability.

    Boride Powder,Nickel Boride Powder,Chromium Boride Powder,Thermal Spray Materails

    Luoyang Golden Egret Geotools Co., Ltd , https://www.xtchvof.com

    Previous Post: R32 T45 T51 mm Mf Connection Thread Drill Rod
    Next Post: Customized Oil Chemical Mining Industry Centrifual Pump Stainless/Carbon Steel CNC Machinery/Machining Part
    Home
    Recent Posts
    • Neoplan Truck Parts Iveco Parts Concrete Truck P…
    • Wind power in the 12th Five-Year Plan will speed…
    • Metal Detector with Auto Reject System
    • Twin Screw Extruder Stainless Steel Barrel
    • Screw and Barrel for Plastic Extruder Machine wi…
    • R32 T45 T51 mm Mf Connection Thread Drill Rod
    • Agricultural pump installation precautions and t…
    • Customized Oil Chemical Mining Industry Centrifu…
    • Potash negotiations negotiated that the yuan app…
    • 39-202 Electric Motor Parts Carbon Brush Holder
    • Regulations and Regulations Introduce Tests on t…
    • QKF6 type combination control valve into the cra…
    • What are the second-hand sprinkler manufacturers…
    • World's highest voltage level ± 1100kv UHV …
    • China accounts for 30% of global insulation mate…
    • Theatre stage lighting design
    • Jiangsu first ticket ECFA import cargo clearance
    • Zhang Xiaokai: China's auto industry faces f…
    • Sanitary Stainless Steel Pipe Union Tube Fitting…
    • The role of chlorophyll meter in large area cult…