Dosing pumps as the ideal chemical injection equipment ideal, widely used in petrochemical, chemical, oil and gas fields, power, paper, pharmaceutical, environmental protection, water treatment and other industries. Dosing pump back pressure valve, there are two general purposes. 1. Used to prevent the gravity flow of gravity under gravity (or siphon), this time generally greater than the pressure of the liquid itself can be used, such as to prevent the liquid level of 2 meters medicine tank gravity, the pressure can be greater than 0.02MPa back pressure Valve, the general metering pump can be used 0.1MPa. 2. Used to stabilize the metering pump flow, such as some metering pump flow with the pressure changes larger, can be set in the metering pump outlet back pressure valve, the metering pump output flow stability, then generally choose back pressure valve The pressure for the metering pump actual use pressure or slightly less than the metering pump working pressure. The check valve in the outlet pipe is used to prevent backflow of the liquid and the back pressure valve is used to maintain a constant pressure at the metering pump outlet. Due to the reciprocating movement of the metering pump, the driving part has a certain impact sound is normal phenomenon, GB / T7782-1996 "metering pump" provisions in the distance of 1 meter from the pump is not the noise of 75 dB (of course, the smaller the better), abnormal sound , The following may be caused by the following reasons: a. The pressure of the pump exceeds the rated pressure of the pump (This phenomenon may occur when the check valve on the pipe is not clear. You can install a pressure gauge at the outlet of the metering pump to the check valve to check the outlet pressure of the metering pump ). b. Worm bearing damage.
Extrusion Parallel Twin Screw Barrel
Twin screw extrusion
Simply described, the twin-screw extruder is a machine consisting of two co-penetrating and self-cleaning identical screws which are mounted on shafts and rotate in the same direction in a fixed closed housing called [barrel" . The twin-screw extruders operate continuously with very short residence times.
The parallel twin screw and the conical twin screw
According to whether the screw axis is parallel or not, the twin screws can be divided into the conical twin screw and the parallel twin screw, where the parallel twin screws are divided into fully intermeshing type, partly intermeshing type, non-engaged type, etc. In the case of parallel screws, the feed end and the die end have the same diameter.
The diameter of the screws in the conical twin-screw extruder is larger at the feed end and smaller at the die end.
Extrusion Parallel Twin Screw Barrel,Parallel Twin Screw Barrel,Twin Screw Parallel,Parallel Twin Screw
Ningbo Jinyi Precision Machinery Co., Ltd. , https://www.jinyi-machinery.com