Cement mixer can only be washed after cooling

    Cement mixer can only be washed after cooling

    The number of companies with an annual output of 100,000 units is higher than that of the previous year (more than one in the previous year), 31 enterprises with an annual output of over 200,000 units (2 less than the previous year), and the annual output is 300,000. There are 20 companies above Taiwan (three less than the previous year), 14 companies with annual output of 400,000 units (one less than the previous year), and companies with an annual output of more than 500,000 units are creating records. There were 11 places (one more than in the previous year). For the degree of production convergence, the cumulative production of cement mixer trucks for the first five companies was 26.33%, which was 1.89 percentage points higher than the previous year; the production of the top 12 companies was 49.92%, which was higher than the previous one. The year is up 1.55 percentage points.

    1. Check the chassis during maintenance and replace damaged parts. Cement mixers will leave traces of dry water on the body.

    2. Avoid cleaning with water other than soft water, including hot water, alkaline water in cement mixers and water with higher hardness. Among them, although FAW-Public was ranked first in the output of 1,017,800 units, it was still lower than the 1,300,000 units produced in Chongqing Chang'an in 2010.

    3 Do not mobilize the machine at the end of the machine to cool down and wash the car. This situation basically reflects the pattern of a full setback in the 2011 passenger car market in Germany, the US Department of models benefited, and the independent brands almost completely frustrated. Concrete mixers are washed with hard water, and after drying they leave traces and films on the exterior of the mixer. Because these substances will damage the paint. Excessive water pressure can damage the paintwork.

    4 When doing maintenance, let the maintenance personnel check the leak site, hold the fastening or change the corresponding oil seal.

    5. Avoid washing in very cold climates.

    6. Pay attention to the maintenance of the crankcase ventilation parts during maintenance.

    Generator Spark Plug

    Bosch Generator Spark Plug, NGK Spark Plug, platinum spark plugs,Generator Spark Plug,OEM Standard Spark Plug

    LIXIN INDUSTRIAL & TRADE CO.,Limited , https://www.jmpowerplugs.com

    Previous Post: Analyze the problems that are easy to occur in the use of CNC bending machine and the corresponding treatment measures
    Next Post: Recall regulations “strength” Self-owned brands into “mainstream”
    Home
    Recent Posts
    • Select high-quality engine oil to reduce wear an…
    • Specialized new models for logistics are favored
    • Xi'an Cummins fuel-efficient and reliable st…
    • Aker receives 24 orders for Sea Wellhead systems
    • Teach you how to buy a suitable refrigerated tru…
    • Refrigerator Features
    • Alfa Laval receives orders for PureNOx water tre…
    • Multipurpose power car
    • Refused to drive bad habits cherish life-safe dr…
    • Cold chain vaccine truck
    • Introduction of practical measurement methods fo…
    • The function, test method and purpose of zinc ox…
    • The implementation of major national integrated …
    • Key technical breakthroughs and product stereoty…
    • The concept and principle of total station
    • The use of mass flow meters and PLC to achieve c…
    • Valve industry transformation and upgrading of m…
    • Is this the last straw for the tire company?
    • How to correctly identify the lighting board
    • Concrete mixer reducer bearing obstruction