Small-sized Changan refrigerated trucks are popular among customers of refrigerated trucks. Many customers call the refrigerated trucks to directly choose Changan refrigerated trucks, and the quality and after-sales guaranteed refrigerated trucks. The following Chengli refrigerated truck manufacturers will take you to understand the refrigerated trucks in Chang’an. Configuration and technical requirements.
Chang'an 2 meters 55 small refrigerated truck
Changan small refrigerated truck chassis configuration: Changan new cab, four- horsepower 70- horsepower gasoline engine ( 16 valves, refrigerated trucks only), 5 speeds, front and rear drum brakes, 165 vacuum wire tires
Standard configuration | |||
engine model: | JL466Q1 | Engine manufacturer: | Chongqing Changan Automobile Co., Ltd. |
engine capacity: | 1012 | Engine power: | 50.7 |
Overall dimensions ( length / width / height ) : | 4380×1580×2390 | Inside the cargo compartment ( length / width / height ) : | 2550×1410×1490 |
Total mass (Kg) : | 1850 | Load quality utilization factor: | |
Curb weight (kg) : | 1170 | Rated load mass (kg) : | 550 |
Wheelbase (mm) : | 2750 | Axle load: | 835/1015 |
Axis number: | 2 | Number of springs: | 7/4+5 |
Number of tires: | 6 | Tire specifications: | 165 vacuum tire |
Identification code: | LEFYECG2×××××××× | According to the standard: | GB17691-2005 State IV , GB3847-20055 |
The blue card on this refrigerated truck is free to enter the urban area.
Changan new refrigerated truck
Chassis configuration: Chang new cab, country, four horsepower gasoline engine 87, the fifth gear, front disc and drum brakes, with the original direction of power, vacuum tire 185,
Standard configuration | |||
engine model: | DK12-01 | Engine manufacturer: | Chongqing Chun'an Huaihai Power Co., Ltd. |
engine capacity: | 1012 | Engine power: horsepower | 87 |
Overall dimensions ( length / width / height ) : | 5250×1740×2650 | Inside the cargo compartment ( length / width / height ) : | 3115×1530×1550 |
Total mass (Kg) : | 3100 | Load quality utilization factor: | |
Curb weight (kg) : | 1600 | Rated load mass (kg) : | 1370 |
Wheelbase (mm) : | 3190 | Axle load: | 1535/1565 |
Axis number: | 2 | Number of springs: | 5/5+1 |
Number of tires: | 4 | Tire specifications: | 185 vacuum wire tire |
Identification code: | LSCABN3R×××××××××× | According to the standard: | GB18352.3-2005 ( National Phase IV ) |
Standard configuration: box size length × width × height: 3115 × 1530 × 1550 about 7.4 cubic meters , the thickness of the car body is 8 cm. The inner and outer plates are made of FRP for refrigerated trucks (reflecting sunlight), the middle sandwich is made of polyurethane foam insulation material, (fire retardant and heat-insulating) vacuum composite bonding, the configuration of the box is all stainless steel locks, stainless steel corners ,Stainless steel door frame, with ceiling light and anti-collision block. The bottom of the box is aluminum plate. The insulation material of our refrigerated and insulated car adopts imported grade XPS , water absorption ratio ≤ 1 , thermal conductivity ≤ 0.028W/mk, compression resistance ≥ 150Kpa, density 30 ~ 45kg/m3 , and the use of advanced internationally advanced fifth-generation fully-closed polyurethane Plate bonding structure, surface materials of the car plate are made of glass steel, stainless steel, aluminum alloy, color steel plate and other materials, the car body has advantages of light weight, high thermal insulation coefficient, strong impact resistance, no leakage, etc. , Water and acid, alkali, salt and other media have good corrosion resistance and aging resistance. By optimizing the design, the center of mass of the vehicle is reduced and the effective volume is increased. After testing, the vehicle integrated energy-saving rate, service life, 1 to 2 times higher than the average Refrigerated compartment.
Foton Bings refrigerator truck
Â
Chassis configuration: Yu-Ling 1500 cab 61 horsepower gasoline Yoo States 4, 5 gear box, rear axle 3 tons, 600-14 nylon tires, large 120
Beam, warm air.
Standard configuration | |||
engine model: | LJ465Q-2AE | Engine manufacturer: | Liuzhou Wuling Liuji Power Co., Ltd. |
engine capacity: | 1051 | Engine power: | 45 |
Dimensions ( length / width / height ) : | 4360×1600×2400 | Inside the cargo compartment ( length / width / height ) : | 2580×1390×1470 |
Total mass (Kg) : | 1884 | Load quality utilization factor: | |
Curb weight (kg) : | 1256 | Rated load mass (kg) : | 498 |
Rated passenger ( person ) : | 2,3 | Front passenger ( person ) : | 2 |
Wheelbase (mm) : | 2370 | Axle load: | 754/1130 |
Number of tires: | 4 | Tire specifications: | 165 nylon tire |
Identification code: | LEFYECG2×××××××× | According to the standard: | GB17691-2005 State IV , GB3847-20055 |
Jianghuai good luck refrigerated truck
Chassis configuration : Good luck single-row cab, Wuling 82 hp gasoline engine, model: LJ474Q3E2, 5-speed gearbox, 6.00-13 ney
Dragon tire single tire, oil brake, original air conditioning.
Standard configuration | |||
engine model: | LJ474Q3E2 | Engine manufacturer: | Liuzhou Wuling |
Overall dimensions ( length / width / height ) : | 4850 × 1640 × 2580 | Cargo bed ( length / width / height ) : | 3100 × 1520 × 1650 7.8 cubic meters |
Total mass (Kg) : | 2325 | Load quality utilization factor: | |
Curb weight (kg) : | 1480 | Rated load mass (kg) : | 715 |
Wheelbase (mm) : | 2600 | Axle load: | 1725/2770 |
Number of tires: | 4 | Tire specifications: | 6.00-13 nylon tire |
Identification code: | LEFYECG2×××××××× | According to the standard: | GB17691-2005 State IV , GB3847-20055 |
Gold Cup Taurus Spirals are mainly used for stirring, mixing and other functions in pipeline transportation. The spiral surface of the screw conveyor has a solid spiral surface. , belt spiral surface and blade spiral surface transparent form. Screw Conveyor&Compactor,Quality Screw Machine,Automatic Conveying Feeder,Shaftless Screw Machine Wuxi Feiyiya Environmental Protection Technology Co., Ltd. , https://www.feiyya.com
The cold rolling mill is an advanced equipment that continuously rolls blades from strip steel. By adjusting the position (roll offset, feed height, roll pressure, guide wheel, etc.), it can roll out blades of various specifications required.
Advantages of cold rolling layout:
It has the advantages of high production efficiency, saving raw materials, good blade quality, high hole diameter, and good wear resistance.
The structures that affect the rolling shape include the material and thickness of the strip, the offset of the roll, the feeding height, the rolling force of the roll, the different specifications of the guide wheels and blades, and the increase in the temperature of the roll during the rolling process. After years of construction, the contract developed this continuous cold-rolled propeller, which has the advantages of smooth surface, high hardness, wear resistance, one-time forming, and continuous no welds.