air filter
There is a lot of dust floating in the air, the main ingredient is silicon dioxide, which is a harder material than metal. Installing an air cleaner can reduce the wear of parts such as cylinders, pistons, and piston rings. If the car is not installed, cylinder wear will increase by 7 times, piston wear increases by 3 times, and piston ring wear increases by 8 times. Therefore, modern car engines are equipped with air filters on the carburetor. Usually travel 5,000 kilometers to clean once. When cleaning, remove the filter element and gently tap the end face, blow it from the inside out with a compressed air machine to remove dust from the core, and do not wash with gasoline or water. The 25000 km air filter needs to be replaced.
Oil filter
During the use of the internal combustion engine, mechanical impurities such as dust, metal wear, and carbon sequestration will be continuously mixed into the engine oil. At the same time, the oxidation of the engine oil with air and combustion exhaust gas will gradually produce gum. Sludge is formed after the mechanical impurities are mixed with the gum, which not only accelerates the wear of moving parts, but also easily causes the blockage of the oil circuit. To ensure the cleanliness of the oil circuit, the engine is equipped with an organic oil filter in the lubrication system. In addition, with Chippu engine internal cleaning agent can better ensure the smooth flow of oil. At present, most cars are installed with spin-on oil filters, which are non-cleanable disposable filters. Therefore, it is best to replace the oil filter when replacing the oil, otherwise it will affect the quality of lubricants. Generally, the 5000 kilometers of travel are replaced. One time is appropriate.
Gasoline filter
Because the automobile will inevitably mix some impurities and moisture in the process of storage and refueling, these impurities will be accelerated as the fuel is brought into the oil supply system and the cylinder of the engine. The gasoline must be filtered before entering the gasoline pump. To ensure the normal operation of the petrol supply system. At the same time, the effect of cleaning agent with Chinerp fuel system will be more ideal. Since the current fuel filter is also a one-time use, its replacement cycle is the most appropriate around 10,000 kilometers.
Doing a good job of "three filters" maintenance work has a very important role in the maintenance of the car engine and driving safety, and we hope that the majority of car owners do not ignore this problem.
CNC Vertical Glass Drilling Machine
The CNC working center applies numerical operation and control system to achieve dynamic management of each axis and speed precision control. So the shape is of precision and the processed sheet is of high quality. It is a CNC vertical drilling and milling machine to process simple and complex drawing and featured by the most advanced technology. It is a solution to the requirement on processing precision, high speed and ease operation.
Glass Drilling and Milling Machine,Vertical Glass Drilling and Milling Machine,Glass Drilling Machine,Glass Driling and Milling Machine
JINAN WEILI MACHINE CO LTD , https://www.wlglassmachines.com