Do you understand these safety requirements when using the trolley wire?

With the development of the domestic economy, the domestic shipping industry has increased, and the production of enterprises, but the avoided use will be applied to the mining industry. The machinery industry is increasingly increasing. Related companies are increasingly mechanized equipment such as cranes and cranes. However, these devices will inevitably need to use the touch line. This article focuses on what you should pay attention to when using the trolley line.

Driving trolley line is also called trolley line and safety trolley line. It is used to supply power to the moving equipment. It consists of two parts, slide rail (fixed part, connected to the power supply, and the guide rail is made of a single length of 4.5m/root or 6m/root), and the collector (sliding part) , Slide on or within the slide rail and contact with the copper bar to take electricity, the collector is used to connect with the mobile motor).

Safety requirements for traffic safety lines

a: When the trolley wire is in use, try to avoid excessive contact with other live parts. Keep a certain safety distance.

b: If the equipment that is powered by the trolley wire is not heavily loaded and the current is too low, use protective devices such as grounding and zero connection for the trolley wire.

c: At the place where the trolley line is installed, a safety sign should be set at the place of use so as to prevent other equipment and personnel from exerting heavy pressure on it and causing the shell to burst, resulting in a safety accident.

d: If the device using the trolley wire is overloaded and the current is too large, the voltage of the trolley wire may be too strong. Install the lightning protection line, protection gap and other voltage protection equipment in the place where the trolley wire is used.

e: When the trolley wire is used outdoors or indoors at a person's centralized place, strict protective measures shall be taken around it to avoid damage to the surface of the trolley wire and leakage at the interface.

f: Although the special type of trolley wire has the characteristics of high strength corrosion resistance, wear resistance, heavy pressure resistance, high temperature resistance, etc., it can be used normally in harsh environments, but it cannot be protected for the second time because of its own characteristics. If the trolley wire is used in harsh environments, secondary protection should be provided to prolong its service life.