Although the fuel tank of the dump truck is not easily damaged at ordinary times, it is best to use it at ordinary times in order to prevent it. Below I will list some of the possible problems with the tank and how we should solve it.
The first one is the leakage of hydraulic oil in the tank. At ordinary times, we have to maintain the fuel tank and other parts from time to time, because these places are all common places, and the depletion is more severe. If we find gasoline during the inspection, The phenomenon of leaking out, first of all to see whether the seal on the cylinder is damaged, because the seal is made of rubber, it is prone to aging, in the high season may also be a little bit of melting, Usual use has a great influence. Second, check whether there is any excess material stuck, such as the stains that have been stained by long-term storage of oil. Then go to the pound to call it to see if it is overloaded. When overloaded, the cylinder may have to squeeze out the oil in the hydraulic cylinder because the pressure is too high, and the oil temperature is too high. The best way is to accept the fuel tank's carrying capacity, the best way is to quickly find a place to rest and rest in the mine, the dump truck is indispensable, especially prone to excessive use. When you find these items, it is advisable to find a nearby repair shop or replace some parts on your own, such as seals, or clean the area around the cylinder and solve the problem yourself.
Another point is that when the cylinder is lifted, the vehicle shakes greatly. The first possible reason is that the weight of the carriage is too large and there is not enough power to rise above it. The second one is that the gear pump is aging and the internal leakage is serious. At this time, the hydraulic oil will Began to heat up as a reminder, pay attention to this phenomenon. Another case of oil shortage in the cylinder, this kind of thing also appears, it is recommended to look at the inlet pipe when refueling whether there is sucking situation, if any, please check the oil pump filter plug, and promptly clean. After eliminating these kinds of failures, they have not yet been discovered. Proposing to check whether there are loose bolts or not, the fault must be immediately reacted when it is just displayed to reduce the risk.
The Swage Standoffs is supplied in Nickel Plated
Available in Round and Hex Configurations,avaialble in 2-56, 4-40 and 6-32 Threads
Manufactured with shank lengths that can accommodate panel thicknesses from .062 [1,57] to .125 [3.18] thick.We use the Swage Standoffs material is stainlee steel ,brass ,aluminum,and steel.
If you need ,you can give us drawing or sample,we will as soon as possible finishing it .
Swage Standoffs
Swage Standoffs,Customized Swage Standoffs,Carbon Steel Swage Standoffs,Electrical Swage Standoffs
Shenzhen Long Wei Wang Precision Technology Co., Ltd. , https://www.electronichdwe.com