1. Crossroads controlled by traffic lights
“Crossroadsâ€, also known as plane intersections, refers to the intersection of two or more roads that intersect at the same plane. Plane intersections are the throats and hubs on the road traffic line, and are the locations where various vehicles change directions and the distribution centers of traffic flows. Traffic jams and traffic accidents are prone to occur when vehicles pass through intersections. To this end, the provisions of the Road Traffic Safety Law and the Implementation Regulations of the Road Traffic Safety Law for vehicles passing through intersections are as follows.
(1) Crossroads controlled by traffic lights The Road Traffic Safety Law stipulates that: when passing through an intersection, a motorized vehicle shall pass the traffic signal, traffic sign, traffic marking or traffic control, as shown in the following figure. The "Regulations on the Implementation of the Road Traffic Safety Law" clearly stipulates that: motor vehicles passing through intersections controlled by traffic lights shall pass the following provisions.
Motor vehicles pass traffic intersections controlled by traffic lights to serve traffic command
1 At the intersection marked with a guideway, drive into the guide lane in the desired direction of travel.
2 The motor vehicle ready to enter the roundabout allows the motor vehicle already in the intersection to go ahead, as shown in the figure below.
Motor vehicles preparing to enter the roundabout allow the motor vehicles already in the intersection to go ahead
3 When turning to the left, turn to the left of the center point of the intersection. Turn on the left turn signal when turning, and turn on the low beam when driving at night.
4 When passing the release signal, pass in order.
5 When the stop signal is encountered, it stops outside the stop line. If there is no stop line, stop outside the intersection.
6 Turn right and meet the same lane when the car is waiting for the release signal, and then stop waiting.
7 At the intersection where there is no signal light, the turning vehicle allows the straight-through vehicles and pedestrians to go ahead. A right-turning vehicle traveling in the opposite direction allows the left-turning vehicle to go ahead.
Second, through intersections without traffic signal control
The Road Traffic Safety Law stipulates that when there are no traffic lights, traffic signs, traffic markings or traffic police commanding intersections, it should slow down and let pedestrians and priority traffic vehicles go first, as shown in the following figure. The "Regulations on the Implementation of the Road Traffic Safety Law" clearly stipulates that a motor vehicle passes through neither the traffic signal control nor the intersection of the traffic police command, except that it shall comply with the provisions of items (2) and (3) of the above-mentioned Article (1). The following rules should also be observed:
When there is no traffic signal, traffic sign, traffic marking or traffic police commanding intersection, it should slow down
1 If there is traffic sign or marking control, the party with priority access will go ahead;
2 If there is no traffic sign or marking control, stop at the intersection and let the car on the right side go first;
3 turning vehicles allow direct vehicles to go ahead;
4 The right-turning motor vehicle traveling in the opposite direction makes the left-turning vehicle go ahead, as shown in the following figure.
A right-turning vehicle traveling in the opposite direction makes the left-turning vehicle go first.
Third, through the control of no traffic lights and no traffic police command at the intersection of the regulations
In addition to complying with the aforementioned relevant provisions, the following provisions should also be observed.
1 If there is a traffic sign or a line control, the party with priority access will go ahead.
2 If there is no traffic sign or marking control, stop at the intersection and let the car on the right side go first.
3 turning vehicles allow direct vehicles to go ahead.
4 A right-turning motor vehicle traveling in the opposite direction makes the left-turning vehicle go ahead.
Note: This article is quoted from Sanojie Technology's official website ()
The series of machines using motor direct drive, high transmission efficiency; rotor by the balance of work, work smoothly; with the factory production of vertical mixer supporting the use of advanced performance, small footprint, low power consumption, easy operation and maintenance , Low noise and low dust pollution, widely applicable to small feed processing plants, livestock farms.
Pulverizer Mill,Fine Grinding Hammer Mill,Feed Grinding Mill,Pellet Processing Mill
XinxiangHexie Feed Machienry Manufacturing Co.Ltd , https://www.hxfeedmill.com