Furrow Plough for Tractor, Plough

Model NO.: 1L-220 1L-320 1L-420 1L-520 1L-225 1L-325 1L-425 1
Trademark: MINGSIN
Transport Package: Iron Frame
Origin: Shandong
HS Code: 84322100
Model NO.: 1L-220 1L-320 1L-420 1L-520 1L-225 1L-325 1L-425 1
Trademark: MINGSIN
Transport Package: Iron Frame
Origin: Shandong
HS Code: 84322100
FEATURES:
This plows are full mounted and sui table for ploughing on the cultivated the land with the soil resistance no more than 1.2kg.

The plow is simple in structure and light in weight. Suitable working scope is wide, after cultivation, the land surface is leveling and the furrow is narrow and the soil is well crushed and turned over.
Hydraulic reversible plow

The modern agriculture requirement is lower cast and higher volume output. The cost for cultivation is paid more and more attention by the customers and to meet this requirement, Our company developed the series of reversal plough, the plough camber is deeply prefer by the customer all over the county in recent years particularly, the working speed is 8-10km/h.

DETAILED SPECIFICATIONS:
Model 1L-220 1L-320 1L-420 1L-520 1L-225 1L-325 1L-425 1L-525
Nos of share 2 3 4 5 2 3 4 5
Width of share(mm) 200 200 200 200 250 250 250 250
Working width (m) 0.4 0.6 0.8 1 0.5 0.75 1.0 1.25
Working depth(mm) 200-250
Weight(kg) 64 100 135 166 125 210 228 245
Matched power(hp) 15-18 25 30-40 50 25 40 50 65
Linkage Standard three-point mounted
FEATURES:
This plows are full mounted and sui table for ploughing on the cultivated the land with the soil resistance no more than 1.2kg.

The plow is simple in structure and light in weight. Suitable working scope is wide, after cultivation, the land surface is leveling and the furrow is narrow and the soil is well crushed and turned over.
Hydraulic reversible plow

The modern agriculture requirement is lower cast and higher volume output. The cost for cultivation is paid more and more attention by the customers and to meet this requirement, Our company developed the series of reversal plough, the plough camber is deeply prefer by the customer all over the county in recent years particularly, the working speed is 8-10km/h.

DETAILED SPECIFICATIONS:
Model 1L-220 1L-320 1L-420 1L-520 1L-225 1L-325 1L-425 1L-525
Nos of share 2 3 4 5 2 3 4 5
Width of share(mm) 200 200 200 200 250 250 250 250
Working width (m) 0.4 0.6 0.8 1 0.5 0.75 1.0 1.25
Working depth(mm) 200-250
Weight(kg) 64 100 135 166 125 210 228 245
Matched power(hp) 15-18 25 30-40 50 25 40 50 65
Linkage Standard three-point mounted

SLA 3D Printing Service

SLA Printing Process

  1. The design is uploaded to a 3D CAD file then sliced into fine digital layers
  2. Layers are added, one at a time, into a vat of liquid resin
  3. Ultraviolet lasers trace new layer boundaries while solidifying the previous
  4. The process continues until a full design is produced
  5. Excess resin is removed and the prototype is cleaned
  6. Final curing is performed – the prototype is complete!

Sla Printing Service,Stereolithography 3D Printing,Resin 3D Printing Service,Sla 3D Printing Materials

Dongguan ganzoo prototype manufacture co.,ltd , https://www.dgpmsheetmetal.com