Plastic Drying Machine for Waste Plastic Hopper

Model NO.: DF1600 to DF30000
Air Piping (mm): 50-127
Capacity/Container(Lt): 20-100, to 2500-5000
Weight(Kg): 20-385kg
Dimesions(mm): 350*300*650 and Others
Trademark: Hadrdega
Transport Package: Wooden Case
Specification: side-hang type & floor type
Origin: Tianjin, China
HS Code: 8419399090
Oriented plastic raw materials dry solution
As to plastic products molding, stable and optimized production process is very important to improve the product quality and production efficiency. HADRDEGA DF series hot air dryer is the best solution to get rid of the surface layer moisture from plastic raw material whose moisture absorption is weak. And it can also apply to the preheating of the raw materials, to make important process parameters to be controlled, to improve the product percent of pass, and to effectively improve the service life of molding host screw.

Hot air dryer
DF series hot air dryer has two installation forms for customers to choose, the models under DF5000 can be chosen of side hanging type, installed directly on the side wall of dry insulation material barrel, models above DF6000 are all floor type, can be installed on the bracket of dry insulation material barrel, with drying capacity range varies from 5 to 3000 kg/h.Plastic Drying Machine for Waste Plastic Hopper
model DF1600 DF3000 DF4000 DF5000 DF6000 DF10000 DF15000 DF20000 DF30000
blowing rate(m³/h) 50-100 70-200 70-200 120-270 180-340 300-430 400-600 750-1000 1000-1500
Capacity (LT)   20-100 100-200 200-350 350-600 600-700 850-950 1000-1500 1500-2500 2500-5000
Blower  (kw)      0.75 0.08 0.08 1.6 2.2 2.2 5.5 11 15
Heating (kw)    1.6 2.7 4 5 8 10 15 27 34
maximum temperature(ºC)    140 150 180 180 180 180 180 180 180
 Power (V) 380/3 380/3 380/3 380/3 380/3 380/3 380/3 380/3 380/3
length  (A) mm 350 350 350 500 500 652 652 850 850
width  (B)mm 300 300 300 600 600 754 754 850 850
heigth  (C)mm 650 700 700 880 880 1365 1365 1600 1750
Outlet (mm) 50 60 60 70 70 85 85 101.6 127
Weight ( kg) 20 20.5 22 87 87.5 115 140 230 385
Energy consumption saving
Raw material preheating can increase the processing efficiency of the machine, also can reduce energy consumption. Using hot air dryer to preheat the raw material can save 38~40% of energy consumption than heating the raw material with the make-up machine, because with double insulation dry material barrels, and with a return air heat exchanger, can save 50~60% of energy consumption compared to ordinary dry machine.

Quality
Customers need high performance equipment to continuously ensure that they have the high quality products, HADRDEGA hot air dryer is to meet the expectations of high quality and the always insistence of the device performance under fierce price competition, HADRDEGA hot air dryer and other HADRDEGA products, are manufactured strictly according to CE standard.

Product advantage
Quality assurance for customer product
Remove the surface water from plastic raw material, preheat before entering the make-up machine
Higher production efficiency
Through the preheating of the raw material, can shorten the molding cycle of product
Low energy consumption
The energy consumption of heating the raw material in the hot air dryer is 38-40%lower than that of heating on the make-up machine 
By return air exchange system, 55-60% of the energy consumption can be saved
Simply operation
With intelligent temperature control system, self temperature setting, real-time drying temperature display and fault alarm indicator, etc

Wuxi Xianglongxin ventilation equipment Factory , https://www.xlx-fan.com