(1) Those who do not have a driver's license are not allowed to operate; the operator must wear labor protection supplies. (2) It is strictly forbidden to drive after drinking. Attention should be concentrated during operation. It is not allowed to eat, smoke or chat during driving. (3) Before driving, you must check that the left and right free rotation of the steering wheel of the steering gear is not more than 25°, the steering arm, the horizontal tie rod ball head and the knuckle king pin are in good condition, close and moderate, and keep the lubricating oil surface to 1 cm below the filling port. (4) Power transmission check all kinds of signals, lighting, electric flute, horns are complete, instruments and instrument lights are intact. (5) Check that the oil, water, gas, electric circuit, drive, steering transmission, and bearing system parts are all in good condition before starting the engine. (6) When loading, it is strictly forbidden to stand under the bucket and boom. The load is not allowed to be biased or overloaded. It is forbidden to run the bucket faster than the carrying position. It is strictly forbidden to make sharp turns. It is strictly forbidden for people to jump up and down during driving. . (7) Personnel should be supervised during high-feed pile operation, the maximum speed is not allowed to be greater than 10 km/h, and the safety below is noted. (8) In the driving, the appropriate speed must be selected according to the road conditions, and it is not allowed to drive beyond the rated maximum speed. (9) When the material is unloaded, the center of gravity of the material is not allowed to be heavier, and the bulk material is not allowed to extend beyond the car. (10) It is strictly forbidden to bake the engine with an open flame when starting the engine in winter. After starting, the engine must be idling for 5 to 10 minutes. After the water temperature, oil temperature rises, and the air pressure reaches the specified value, the operation is allowed to run.
Gear Shaving Machine,Gear Shaving,Cnc Gear Shaving Machine,Precision Gear Shaving
Zhejiang Toman Intelligent Technology Co., Ltd , https://www.tomanmachines.com