The front automatic positioning feeding table is provided with a turning door and a residual material collecting box, and the cutting residual material is pulled by the end clamp to the turning door, the turning door is automatically opened, and the remaining material falls into the collecting box. Flip device: When it is necessary to cut two opposite sides, the device automatically flips the sheet 180°, saving time compared to the second rotation of the rotating device. Front locating pin: Located on a line parallel to the cutting edge, when the side of the sheet to be cut is much shorter than the front, the end clamp pushes the sheet to the front locating pin.
This positioning pin is also used when using the turning device. Shearing machine: similar to the standard model, the gap, shear angle and rear positioning can be adjusted numerically according to the specifications of the sheet material to ensure the quality and precision of the shear section. Its structure is more suitable for the connection with the loading and unloading device. Processing of the material side: The cut waste material is stored in the waste collection box behind the shearing machine, and the collection box can be pulled out from the side wall of the shearing machine.
Control system: The DAC350 control system selected by Gusborough is fully functional and can realize full automatic control of the whole process. A programmable logic controller is used to solve the shear size control in a dynamic way, and provides software to supervise and manage all functions of cutting and loading and unloading. According to the raw material specifications, it can automatically generate a cutting and cutting program that is conducive to shear processing, with advanced power-off memory, fault diagnosis, tracking display and manual intervention.
(Finish)
Lithium Ion Battery Additives,Lithium Ion Battery Additive,Electrolyte Additive Agent,Electrolyte Additive
Jiangsu Zhongluman New Material Technology Co., Ltd , https://www.zlmchemical.com