Grand contest is divided into two parts: theory and practice, and comprehensive evaluation of participating personnel. The theoretical part has been completed before the actual operation competition. The actual operation part will be assessed by the technical leader of the same type of work according to the type of work.
First of all, a forklift worker "big wide goods narrow gate" race was conducted. The players were required to drive a forklift with a width greater than the width of the gate to pass through the designated area. In order to increase the difficulty, a bottle of mineral water is placed at both ends of the cargo. The operator must always pay attention to whether the water bottle is stable under the premise of not knocking the bar door down. Once the water bottle falls or falls, it will lose points. At the beginning, the players would inevitably make some mistakes because they were not familiar with the set driving conditions. After repeated patient attempts, they continued to learn from the failures and slowly found a suitable method. The time for everyone to finish the game is getting shorter and shorter, and the number of mistakes made by players is getting less and less.
Job skills contest
At the same time, the fitter skills contest is also intense and intense. Everyone is busy on their own workstations. Participants are required to make parts according to the drawings within the specified time. I saw the players picking up the drawings one at a time, measuring the data of the unfinished products again and again, constantly adjusting and modifying, and striving for perfection. Looking at their serious expressions and their incomparably focused eyes, it seems that they are not making a small part at the moment but a unique craft.
The last skill contest is the welder contest in the packaging workshop. The leaders carefully observed and held the handheld protective cover. The participants competed in a trio and each person was required to complete one sheet and one tube welding. Sparks reflect their professionalism and dedication. After the match, the scores were determined by the members of the master studio, the three technical masters and the authoritative welders with rich experience. According to the more than 20 criteria, the contestants' works were compared one by one and the winner was finally decided.
The competition for all skills in this job requires technicians to be stable and accurate on a proficient and fast basis. This not only tests the operator's excellent technology, but also tests the operator's stable and meticulous mentality. In the course of the competition, the operators seriously conscientiously strived for perfection, fully demonstrated the elegance of the Yunnei people, and fully carried forward the craftsman spirit of excellence, meticulousness, rigorous dedication, and professional dedication.
Engine 150cc: Since its establishment committed to the professional production of strong sports style Tricycle. The displacement is 150cc and its single cylinder with 4 stroke. Air cooler. Compression ratio is 9.2:1. The tire size is 4.50-12/5.00-12.The between bore and stroke is 62 x 49.5 mm, 60 kilometer an hour for max speed. 9.0/8500 kw/rpm for the max output power.The tricycle use the gasoline by 90# or above. Start method is kick and electric. Cargo box size is 1.6L×1.2(W)M / 1.8(L) x 1.2(W)M / 2.0 (L) x 1.2 (W)M. The tricycle front and rear is drum brake, which is front and rear tire. Max loading capacity about 500kgs. There are various colors for choose, such as Red, dark, black, white, blue and yellow. In addition, It can be fixed with Mp3 with windshield, rain tent and passengers seats.
150Cc Cargo Tricycle,150Cc Hydraulic Cargo Tricycle,150Cc Tipper Cargo Tricycle,150Cc 3 Wheels Cargo Tricycle
JIANGMEN CHANGHUA GROUP CO., LTD. , https://www.changhuagroup-motor.com