Cross-sectional air flow measurement device performance characteristics and technical indicators

    Cross-sectional air flow measurement device performance characteristics and technical indicators :
    Performance characteristics:
    1. Although the flow velocity through each point on the pipe cross-sectional wind measuring device is not constant, it is required to be stable. In the occasion where the pipeline installation environment is harsh, a flow regulator is used and placed upstream of the speed measuring device. Its role is to convert an unstable fluid into a bundle of stable fluids within an equal length for accurate measurements.
    2. Because the flow velocity through the pipeline cross-section measuring device at each point is not equal, it is required that the value measured by the sensor be as close as possible to the average value. Structurally, the average of the sum of the velocity at each point is generated. The detection probe detects the total pressure and static pressure of the air flow in accordance with the principle of multi-point automatic balance pitoting.
    3, no straight pipe before and after, as long as there are 250 ~ 300mm long installation position.
    4. It can measure airflow at an angle of 30° without being affected by irregular fluids or even multi-rotating airflow.
    5, does not require on-site calibration, that flow coefficient K = 1.
    6, the pressure loss is very small.
    7. The positive pressure hole and the static pressure hole are in the direction of flow, which greatly reduces the possibility of blockage.
    Technical indicators:
    1, the shape of the pipeline: rectangular and circular shaped pipes.
    2. Accuracy: 1%, 1.5%.
    3, repeatability: ± 1%.
    4, diameter: 50 ≤ D ≤ 5000mm.
    5, working temperature: -50 ~ 450 °C.
    6, working pressure: 0 ~ 16Mpa.
    7. Reference standards: GB/T2624-2006, GB1236-2000 and JJG835-93.
    8, connection: flange connection, welding.
    9, the gas flow rate needs to be greater than 4m/s.

    Core Tip: The above is the technical introduction of the “ cross-sectional air flow measuring device ” . You can contact the sales staff or technical engineer of Zhongwei Company here to answer your questions and learn more about the specification, model, price and other of the flowmeter. All information materials.

    Others Machine

    Others Machine,High Quality Others Machine,Others Machine Details, CN

    KYD Automatic Mask Machine Factory , https://www.kydultrasonic.com

    Previous Post: Shanghai Institute of Optics and Photonics succeeded in realizing ultra-high brightness gamma ray source driven by ultra-short laser
    Next Post: Animal and Plant Disease Inspection Vehicle_Swine Fever PCR Express Inspection Vehicle_Ford V348 Express Inspection Vehicle Advanced Design Performance
    Home
    Recent Posts
    • Experimental study on purification process of me…
    • Separation technology of heavy metals in waste a…
    • Mechanical strength, smashability and grindabili…
    • Feasibility of promotion of gold adsorption tech…
    • Calculation formula of slurry tube and trough co…
    • Selection of Pipe Materials in Zinc Oxygen Press…
    • Gold-arsenic ore dressing technology
    • Influencing factors of gold extraction by heap l…
    • Mechanics, squad leader, job responsibilities
    • Unit of measure for gold
    • Beneficiation process of high-sludge hematite or…
    • Spiral concentrator and spiral chute
    • Development stage and characteristics of large-s…
    • Pre-cyanide granulation heap leaching of gold or…
    • Iron tailings brick
    • Lead-bismuth alloy fire separation process techn…
    • Leaching process (2)
    • Xanthate oxidation
    • How to use the proper shifting of the suction tr…
    • Preparation of pure molybdenum compound (3)