If the engine of a bulk cement truck is overheated on an ordinary highway, the speed should be reduced as quickly as possible, and the bulk cement truck should be driven into the shade or to a relatively cool place to stop the bulk cement truck. Open the engine cover and allow the engine to idle and wait for the engine temperature to gradually return to normal. After the engine water temperature returns to normal, the engine is turned off. Then wait for a period of time until the water temperature of the engine has sufficiently decreased, and then check the cooling water volume of the engine. At this time, the amount of cooling water in the engine is seriously insufficient. After replenishing the cooling water by the specified amount, check the cooling system again. After confirming that there are no other problems, start the engine and continue driving.
If the bulk cement truck had an overheated engine on the expressway, the heater must be fully opened and the window should be opened immediately. At this time, the inside of the cabin would be hot like hell. Because there is warm air to help cool the cooling water, cooling water temperature can be greatly reduced. This can continue to drive, find the exit of the expressway nearby, and drive the bulk cement truck to a safe place to stop. Next, just follow the method described above to bring down the temperature of the engine. Note that it is best not to park bulk cement trucks on the roadside, so as not to affect traffic or crashes. The bulk cement trucks must be parked in a safe place.
1..Easy and flexible full hydraulic control
The rig's speed, torque, thrust axial pressure, reverse axial pressure, thrust speed, and lifting speed can be adjusted at any time to meet the requirements of different drilling tool working conditions and different construction processes
2.Top-drive slewing propulsion lift
It is easy to connect and disconnect the drill pipe, shorten the auxiliary time, and also facilitate drilling with the pipe.
3.Multifunctional drilling
Various drilling processes can be used on this rig, such as: down-the-hole drilling, through-air reverse circulation drilling, gas lift reverse circulation drilling, cutting drilling, roller drilling, tube drilling, and Core drilling under development and more. The drilling rig can be equipped with mud pumps, foam pumps and generators according to user needs. The rig is also equipped with various hoists as standard.
4.High efficiency
Due to the full hydraulic and top-drive slewing propulsion lifting, it is suitable for various drilling processes and various Drilling Tools, with convenient and flexible control, fast drilling speed and short auxiliary time, so the operation efficiency is high.
Lifting Drilling Machine,Lifting Rig
JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.xitecdrillingwx.com