Superior Mushroom Plug Repair Patches MP-606
Don't miss the opportunity to check our full range of tire repair products.
Â
HOPSON TYRE REPAIR will always surprise you!
General Info
Item No.: MP-912
Specification: Patch Size 3 1/2" (88*88mm), Stem Dia. 7/16" (12mm)
Packing: 24pcs/box, 12box/ctn
Â
Selling Points
1. Suitable for radial and bias-ply tires
2. Designed for chemical or heat vulcanization
3. Patch has gray vulcanizing gum with blue poly backing
4. Stem is wrapped with gray vulcanizing gum
5. No special tools required – use a carbide cutter to prepare the injury channel. Install from the inside, pull through, and cut off the wire.
6. Combines the benefits of a plug and patch in one unit
7. Ideal for crown, shoulder, or sidewall injuries in passenger, speed-rated, run-flat, light truck, and truck tires
8. Available in a wide range of sizes for various applications
Quality Guaranteed
We ensure excellent quality, comparable to leading brands like Rema Tip Top and Tech. Free samples are available for customer testing and evaluation.
Description
The plug repair units require no special pulling tools. Simply insert the plug into the puncture from the inside of the tire and pull the repair unit through from the outside. Both the stem and the patch are coated with vulcanizing gum to ensure a strong bond on both the inner liner and through the injury. These patches are black with gray vulcanizing gum and can be vulcanized chemically or using a heat curing system.
This single product repairs both the hole and the surface, offering protection against leaks and sealing against moisture.
Â
Instructions
1. REPAIR PROCEDURES FOR COMBINATION UNITS
Before repairing, mark and remove the object causing the puncture. With the tire inflated, apply a soap solution to the damaged area to determine if the air loss is due to one or multiple punctures. Carefully remove the tire from the wheel to avoid further damage and place it on a spreader.
2. PROBING
Probe the puncture to assess its size and direction, ensuring all foreign materials are removed. Do not attempt to repair if the injury exceeds the recommended repair limits.
3. INTERNAL EXAMINATION
Spread the tire beads and mark the damaged area with a crayon. Inspect the tire carefully to confirm that the damage is within acceptable repair limits. If the limits are exceeded, do not proceed with the repair.
4. REPAIR UNIT SELECTION
If the injury is 1/4'' (6mm) or smaller and the angle does not exceed 25 degrees, a combination repair unit is the best option. Reinforced Combination Units are suitable for tread areas only, while Universal and Lead-Wire Combination Units can be used in any repairable area.
5. CLEANING
Use a buffing solution and an inner scraper to clean an area slightly larger than the patch head of the repair unit. This ensures the removal of dirt and mold lubricants, improving adhesion.
6. BUFFING
Buff the repair area with a buffing wheel to create a textured surface, being careful not to damage the inner liner. Use an appropriate reamer or cutter (for lead-wire units) to drill the injury channel from both the inside and outside, removing damaged cables and debris. Vacuum away any buffing dust.
7. CEMENTING
Apply vulcanizing cement to the injury channel and the prepared repair area. Work the cement into the rubber thoroughly. Avoid puddling or scraping. Allow the cement to dry completely before proceeding.
8. INSERTION
Remove the backing from the patch head (and the stem for lead-wire units). Avoid touching the gum surface. Push the quill or lead wire into the injury from the inside and pull it through using pliers. Continue until the patch head is firmly seated against the inner liner.
9. FINISH REPAIR
Stitch the patch bead to the inner liner, starting from the center and working outward to eliminate any trapped air. Cut the stem 1/8'' above the tread surface. Apply Inner Liner Sealer to the overbuffed area and allow it to dry.
| Part No. | Description | Box Qty (pcs/box) | CTN Qty (box) |
| MP-264 | Patch Size (26mm), Stem Diameter (4mm) | 60 | 36 |
| MP-364 | Patch Size (36mm), Stem Diameter (4mm) | 24 | 36 |
| MP-366 | Patch Size (36mm), Stem Diameter (6mm) | 24 | 36 |
| MP-466 | Patch Size (46mm), Stem Diameter (6mm) | 24 | 36 |
| MP-507 | Patch Size (56mm), Stem Diameter (7mm) | 24 | 48 |
| MP-609 | Patch Size (60mm), Stem Diameter (9mm) | 24 | 27 |
| MP-912 | Patch Size (88*88mm), Stem Diameter (12mm), Square Shape | 24 | 12 |
| MP-1014 | Patch Size (100*100mm), Stem Diameter (14mm), Square Shape | 24 | 12 |
| MP-1018 | Patch Size (100*100mm), Stem Diameter (18mm) | 24 | 12 |
Don't miss the opportunity to check our full range of tire repair products.
Â
HOPSON TYRE REPAIR will always surprise you!
The new secondary structure column pouring pump is suitable for super high-rise fine stone concrete conveying, construction floor group structure column pouring, mainly for some special construction working conditions or narrow space construction conditions by the size of the equipment limitations and cause construction inconvenience or difficult to complete the construction progress and elaborate high-tech products. Small fine stone mortar concrete pump in the construction industry has played a big role
Concrete Pump,Portable Concrete Pump,Concrete Pump Machine,Mini Electric Concrete Pump
Shandong Nuoman Engineering Machinery Co., Ltd , https://www.chinanuoman.com