Due to the scope of his work, a heavy-duty wrecker should be a relatively oil-consuming vehicle. Here are some ways to save fuel.
During the process of wrecker driving, pay attention to the water temperature table, and the normal water temperature of the engine should be maintained between 80°C and 90°C. If it is too high or too low, it will increase fuel consumption. Special attention should be paid to the fact that if the water tank is insufficient, the water temperature can quickly rise. When the water temperature exceeds 95°C, the fuel consumption is increased by 30%-40% compared to the normal temperature, and the wear and damage to the machine parts can easily occur. Regularly check the oil and lubricant level, and change the oil and lubricant according to the schedule.
Correctly maintain the engine, select the brand's authentic engine oil, remove the accumulated product of the cylinder combustion chamber and the spark plug, and find that the problem is eliminated at any time. Even a small fault will reduce the power of the engine and waste fuel. Regular replacement of air and oil filters will affect fuel consumption.
At the same time, if you feel that your car is running out of power, you have to stop to see if there is a leak in the tire. If the tire pressure is too low, the fuel consumption will increase significantly. Keep the balance of the tire, check the tire's pattern from time to time to see if there is any uneven wear. At the same time to see if there is no sharp object embedded in the tire and cause a gradual leak. Always check the tire pressure to keep it in the best condition. Not enough gas or too much gas will increase fuel consumption. Therefore, tire pressure should be checked regularly. As long as there is a tire less 4kPa, this tire will reduce the life of 10,000km, but also make the total heavy fuel consumption of the heavy wrecker .
Laser Cutting Machine,Plastic Film Blowing Machine,Carry Bag Machine,Cricut Machine
Ruian New Trend Imp. And Exp. Co., Ltd., , https://www.newtrendexp.com