Emergency Handling Techniques for Emergency Car Driving Emergency

    During the safe driving of the car, we encountered various emergencies and emergencies. What should we do? Let's have a look together

    1. Just as you are driving right, a car suddenly opens up and takes up the lane in front of you, forcing you to leave the right lane. At this time, be careful not to step on the brakes, let alone return to it. In the original driveway, you should stop pressing the accelerator, hold the steering wheel with both hands, control the vehicle, and then slowly play in the left direction. During this time, you need to gently pull the brakes a few times to slowly slow down the driveway. Carefully return to your original lane.

    汽车安全驾驶突发事件的紧急处理技巧_副本1.jpg

    2. When you are driving on the road, it may seem inevitable that a car will open. At this time, you must not hit the steering wheel to the left. You must slam the brake and turn the steering wheel to the right. The collision is inevitable. You should drive out of the driveway immediately, risking a roll-over, and do not drive the steering wheel to the left.

    3, if the car accidentally fell into the water, you must quickly unlock the seat belt, and think of ways to climb out from the window. If the windows do not open, but also calm, although the car is sinking, but there is still air in the car, or can breathe, wait until the car into the car, the same pressure inside and outside the car, the door can be opened.

    4, in the case of brake failure, need to repeatedly step on the brake, quickly shift the gear to the lowest speed gear. If there is really no way to brake, you can only turn off the engine and find a suitable object to hit.

    5. If you find that the car is slipping, you must decelerate immediately and slide the steering wheel in the opposite direction. Once the car is no longer slipping, brake slowly. If the car's four wheels are slipping, release the brakes and allow the wheels to rotate.

    6. In the middle of driving, the windshield is broken, so don't brake. You must concentrate on getting the car to move on and stop when you are in a safe area.


    Sewing Machine Parts

    Sewing machine parts & accessories are including needle clamp, presser bar lifter, presser foot, stitch regulator,throat plate / needle plate, thread guard, thread guards / eyelets,thread take-up, tension devices / tension disco, oscillating shuttle,rotary hook, arm, arm shaft, balance wheel / hand wheel, bed, bed shaft, bobbin winder, face plate, knee lift, thread stand, bobbin,bobbin case, bobbin case latch, bobbin case tension spring, feed dog, needle bar, etc. We are engaging in sewing machine parts wholesale and industrial sewing machine manufacturing.

    Jeans Sewing Machine Solution

    sewing machine spare parts,juki sewing machine parts,spare part sewing machine,sewing machine parts fitting,sewing machine parts accessories

    DONGGUAN CHUANGHUI SEWING MACHINE CO.,LTD , https://www.ch-sewing.com

    Previous Post: · ZF 460 million acquisition of Swedish brake system supplier Haldex
    Next Post: Relationship between Capacitance Change and Dielectric Constant of RF Admittance Rod Probes
    Home
    Recent Posts
    • Experimental study on purification process of me…
    • Separation technology of heavy metals in waste a…
    • Mechanical strength, smashability and grindabili…
    • Feasibility of promotion of gold adsorption tech…
    • Calculation formula of slurry tube and trough co…
    • Selection of Pipe Materials in Zinc Oxygen Press…
    • Gold-arsenic ore dressing technology
    • Influencing factors of gold extraction by heap l…
    • Mechanics, squad leader, job responsibilities
    • Unit of measure for gold
    • Beneficiation process of high-sludge hematite or…
    • Spiral concentrator and spiral chute
    • Development stage and characteristics of large-s…
    • Pre-cyanide granulation heap leaching of gold or…
    • Iron tailings brick
    • Lead-bismuth alloy fire separation process techn…
    • Leaching process (2)
    • Xanthate oxidation
    • How to use the proper shifting of the suction tr…
    • Preparation of pure molybdenum compound (3)