Model NO.: JYS-01-01
Warranty: 1 year
Trademark: No brand
Transport Package: Carton Box
Origin: China
HS Code: 84312000
| JYS-01-01 | |||
| Tube Size | Inlet 32mm, Outlet 25mm | Suction | 1m |
| Tube Surface Treatment | Power Coating | Rotation | 70 r/min |
| Galvanization | Flow | 28 kg/min | |
| Chrome Plating | Qty | 10 pcs | |
| Pump Body Diameter | 135 mm | Inner Box | 36*18*153 cm |
| Lift | 7 m | Carton Box | 80*38*37.5 cm |
| G.W./N.W.: | 21/20 kg | ||
Operation:
1. Insert the standpipe into the bung of the barrel, then thread the lower part of the bung adapter onto the bung and hand-tighten only.
2. Slide the top part of the bung adapter down over the top of the lower part and hand-tighten it to secure the standpipe in place.
3. When ready to pump, rotate the handle clockwise to begin the flow of fluid.
Use Attention:
1. We recommend using this pump for dispensing oil, gasoline, kerosene, diesel fuel, and low-viscosity oil. Avoid using it with water, acids, or alkaline chemical solutions.
2. Ensure that the rotation direction of the handle follows the arrow on the main engine (pump part) for proper operation.
3. If the pump is used incorrectly with drugs, saline, etc., immediately clean the pump body with lamp oil to avoid damage.
4. Choose a suitable location for the oil tank, avoiding rain, dew, sunlight, and areas prone to fire. Follow the Fire Services Act regulations.
5. Please note that if the machine is not used according to the warnings and precautions, any injuries or accidents that occur will not be the manufacturer's responsibility.
6. Unauthorized modifications, improper use, or other incorrect operations are not the manufacturer's responsibility.
This hand pump is suitable for various conditions, as long as the oil being extracted does not freeze.
7. Do not extract water, acid, or alkaline chemical solutions with this pump.
Steel structure table, Built-in sensing function, Belt type trawl wheel
Zhejiang Lejiang Machine Co., Ltd. , https://www.cnlejiang.com