Summary:
1.LQRY Hot Oil Boiler Thermal Oil Hot Oil Pump is suitable for heat-conduction oil, or other hot oils with temperature ≤370°C
3.It's widely used in petroleum oil, chemical industry, rubber, leather, food industry, grease, boilers, construction, road maintenance, pharmaceutical, plastics, rubber, synthetic fiber textile, printing and dyeing and other industrial fields.
Â
Seal Type:
1.Using the combination in the form of the packing seal and the mechanical seal, packing with high temperature resistant filler material, has a good thermal adaptability.2.The mechanical seal: a high mechanical strength, good abrasion carbide material, guarantee the sealing performance under high temperature conditions.
3.Polytetrafluoroethylene (PTFE) do lip seal, the sealing performance leap than the rubber sealing reliability increased by 25 times, highly corrosion-resistant.
Â
Product Details:
| Working Principle: | Centrifugal |
| Main Applications:Â Â | Hot oil, thermal oil, high temperature oil, etc |
| Driver: | Electric motor, diesel motor. |
| Power Specs: | 220/380/400/415V 3phase;50hz/60hz |
| Max.permissible fluid temperature: | 370°C (698°F) |
| Type of connection: | Flange |
| Installation position: | Horizontal |
| Casing parts material: | Cast steel |
| Shaft seal type:Â Â | Shaft seal ring, Mechanical seal, Carbon seal |
| Free passage:Â Â | 1mm |
| Maximum viscosity: | 5X104C.S.T |
| Maximum drive rating:Â | 132KW (180HP) |
| Maximum caliber:Â Â | 150mm (6inch) |
| Maximum discharge-side pressure: | 0.85Mpa (8.5bar) |
| Maximum head:Â | 85m (278.8ft) |
| Flow rate range:  | 4.5-400m³/h(19.8-1760US.GPM) |
Â
Performance Data:
| Model | Capacity  (m3/h) |
Head (m) |
Speed (r/min) |
Shaft Power  (kw)  |
Motor Power (kw) |
| 26-20-100 | 4.5 | 15 | 2825 | 0.45 | 0.75 |
| 50-32-150 | 8 | 22 | 2900 | 1 | 1.5 |
| 50-32-160 | 10 | 25 | 2900 | 1.5 | 2.2 |
| 65-40-160 | 12.5 | 25 | 2900 | 2.5 | 3 |
| 50-50-170 | 12.5 | 32 | 2900 | 3.2 | 4 |
| 65-50-180 | 32 | 32 | 2900 | 4.5 | 5.5 |
| 65-50-170 | 40 | 25 | 2900 | 4.5 | 5.5 |
| 80-50-180 | 40 | 40 | 2900 | 6.7 | 7.5 |
| 80-50-170 | 60 | 20 | 2900 | 6.7 | 7.5 |
| 100-65-190 | 60 | 38 | 2930 | 9.2 | 11 |
| 100-65-200 | 80 | 40 | 2930 | 12.5 | 15 |
| 100-65-220 | 58 | 50 | 2930 | 12.5 | 15 |
| 100-65-230 | 100 | 55 | 2940 | 19.5 | 22 |
| 125-100-190 | 155 | 30 | 2940 | 20 | 22 |
| 100-65-240 | 100 | 70 | 2950 | 25.5 | 30 |
| 100-65-257 | 100 | 80 | 2950 | 32.5 | 37 |
| 125-100-220 | 160 | 45 | 2950 | 25.5 | 37 |
| 125-80-250 | 160 | 60 | 2970 | 35.5 | 45 |
| 125-100-257 | 200 | 60 | 2970 | 42.8 | 55 |
| 125-100-260 | 260 | 70 | 2970 | 64.3 | 75 |
| 125-100-270 | 300 | 70 | 2970 | 75.3 | 90 |
| 125-100-270 | 220 | 85 | 2970 | 68 | 90 |
| 150-125270 | 340 | 76 | 2970 | 89.5 | 110 |
| 150-125-270 | 400 | 78 | 2970 | 106 | 132 |
1. Using advanced technology, the appearance is beautiful and elegant.
2. High structural rigidity, smooth operation and low noise.
3. Equipped with advanced concentration pretreatment equipment (good for sludge flocculation) and low operating cost.
4. The gravity dewatering area is equipped with advanced distributors to distribute materials evenly and extend the life of the filter belt.
5. It has an extra-long gravity dewatering zone and a wedge-shaped dewatering zone, which fully dehydrates the material and ensures that the material will not overflow in the pressing zone.
6. The roller system is arranged scientifically and orderly. Gravity dehydration, wedge dehydration and press dehydration are discharged separately without interfering with each other. The diameter ratio of the press dehydration roller is large and the dehydration effect is good. Therefore, it has large production capacity, energy saving and high efficiency.
7. The continuous operation from feeding to mud cake discharge has a high degree of automation. A PLC interface can be set up as needed to facilitate centralized microcomputer control.
8. The power transmission mechanism adopts mechanical or variable frequency stepless speed regulation, with a large speed regulation range and wide adaptability.
9. The filter belt is equipped with a reliable backwash device to ensure the dehydration effect of the filter belt.
10. Use pneumatic tensioning and pneumatic automatic deviation correction devices to ensure the safe and normal operation of the filter belt.
11. The operation is safe and reliable, using infrared safety protection and a full range of emergency safety parking devices.
12. Filter belts with different structures can be configured according to different materials to achieve high filtration accuracy.
Filter Press,Pp Plate Filter Press,Syrup Filter Press,Belt Filter Press
Changzhou Senjie Environmental Protection Equipment Co., Ltd. , https://www.senjie-hb.com