Strong winds frequently drive the suction truck (sucking car) safely

    The seasons in which the winter and autumn seasons alternate are always frequent with strong winds, especially in the north where the wind is full and dusty. This is not a happy thing for driving a suction truck (sucking car). So, what are the tips for driving a suction truck (dump truck) in windy weather?

    Driving under strong wind conditions should be based on wind direction, wind speed, and whether there is wind and sand, and special attention must be paid in order to drive safely.

    When driving in a strong wind, the speed should be properly slowed down, the wind direction should be correctly identified, and the steering wheel should be held firmly to prevent the driving route from shifting due to wind power. Pay attention to the lateral stability of the vehicle, minimize overtaking, and extend the time appropriately when honking.

    When driving against the wind, you should pay attention to a sudden change in wind direction or a large camber in the road. The sudden decrease in wind resistance will increase the speed suddenly. During driving, pedestrians should be prevented from escaping from the dust raised by the vehicle and suddenly run to the other side of the road when the vehicle approaches.

    In the windy and sandy days, the front lights should be turned on and diligently horned to draw attention from pedestrians and vehicles, and to proceed slowly and ready for braking.

    When driving on a windy day at night, anti-glare low-beam lights should be used. High-beam lights should not be used to avoid the glare of the light curtain and affect the line of sight.

    When the wind is particularly heavy, the vehicle should be parked on the windward side of the road, with the front facing away from the wind and semi-closed shutters to prevent the fine particles from being sucked into the cylinder and accelerating the wear of the machine parts.

    Cargo vehicles should be fastened to the tarpaulin on the car to secure the cargo on the car. Lightweight and bulky materials should be loaded to avoid the storm, so as to prevent the vehicle from being blown away from the normal driving route by the storm.

    Precautions

    1. When driving on a dusty road, care should be taken to maintain a safe distance from the vehicle to prevent the dust raised by the preceding vehicle from obstructing sight.

    2. The stability of bicycles, tricycles, motorcycles, etc. is affected by the wind, and the safety distance should be increased when they meet.

    3. When driving in a windy weather in a rocky area, care should be taken that small stones often roll on roads, thereby damaging people and vehicles.

    4. The weather in the desert area is abnormal and driving is difficult. It also poses a danger to the components and cargo loading of the suction truck ( suction truck ). It is necessary to know the local weather conditions in time and choose a good route and time.

    99% Alumina Ceramic

    99% Alumina Ceramic,Alumina Ceramic Sleeve,Custom Ceramic Alumina,Alumina Ceramic Insulator

    Yixing Xiangyang Jiujiu Chinaware Industry Co., Ltd. , https://www.xyjjceramic.com

    Previous Post: Stepping on the throttle of a high-pressure cleaner
    Next Post: LED lighting transformation road: soldiers will block the water to cover the earth
    Home
    Recent Posts
    • Technology innovation Foton Resa to push LNG pow…
    • The application of new characterization in the c…
    • The owner of his own diagnosis of car faults eig…
    • Garbage truck changed the history of Gulangyu sa…
    • Artificial Climate Room basic parameters functio…
    • Application analysis of high efficiency and spec…
    • Maintenance of sewage suction vehicle is very ex…
    • Driving in a foggy day and driving a sewage truc…
    • UASC will transform super-large container ship d…
    • Special car wrecker spark plug troubleshooting T…
    • Agricultural Plastics Industry Innovation Improv…
    • Truck Scuff Illuminated Motor Trim Spare Auto Pa…
    • Two new products from China Changchai passed the…
    • Shenzhen's LED industry ranked first in the …
    • The three major preconditions for the icebreaker…
    • Getrak and Dongfeng to invest 1 billion to build…
    • Application of PLC in Safety Design of CNC Machi…
    • Paperless Recorder Common Faults and Solutions
    • Stepping on the throttle of a high-pressure clea…
    • Strong winds frequently drive the suction truck …